Microsoft Remote Desktop 10 For Mac License Issue Is Preventing

21-04-2021 by



On your local Windows 10 PC: In the search box on the taskbar, type Remote Desktop Connection, and then select Remote Desktop Connection. In Remote Desktop Connection, type the name of the PC you want to connect to (from Step 1), and then select Connect. On your Windows, Android, or iOS device: Open the Remote Desktop app (available for free.

-->

This article helps you understand the most common settings that are used to establish a Remote Desktop session in an enterprise environment, and provides troubleshooting information for Remote desktop disconnected errors.

  • In order to get started with Microsoft Remote Desktop, visit the Mac App Store. Click the blue “App Store” icon in your dock. Once the app opens, you will see a search bar at the top right corner of the screen. Search with the keywords “Microsoft Remote Desktop” or “remote desktop Mac” to search and download the app for free.
  • In this blog, we'll teach you how to remove inactive sessions from Remote Desktop Services, as well as how to prevent them in the future. How to remove a disconnected user from RDS. To address this “disconnected” issue each time it occurs an administrator needs to complete the following steps: 1. Log onto the RDS server as an administrator.

Original product version: Windows Server 2012 R2
Original KB number: 2477176

Note

This article is intended for use by support agents and IT professionals.

Remote Desktop Server

A Remote Desktop Session Host server is the server that hosts Windows-based programs or the full Windows desktop for Remote Desktop Services clients. Users can connect to an RD Session Host server to run programs, to save files, and to use network resources on that server. Users can access an RD Session Host server from within a corporate network or from the Internet.

Remote Desktop Session Host (RD Session Host) was formerly known as the Remote Desktop server role service, and Remote Desktop Session Host (RD Session Host) server was formerly known as Remote Desktop server.

Remote connections for administration

Remote Desktop supports two concurrent remote connections to the computer. You do not have to have Remote Desktop Services client access licenses (RDS CALs) for these connections.

To allow more than two administrative connections or multiple user connections, you must install the RD Session Host Role and have appropriate RDS CALs.

Symptom 1: Limited Remote Desktop session or Remote Desktop Services session connections

When you try to make a Remote Desktop Connection (RDC) to a remote computer or to a Remote Desktop server (Terminal Server) that is running Windows Server 2008 R2, you receive one of the following error messages:

Remote Desktop Disconnected.
This computer can't connect to the remote computer.
Try connecting again. If the problem continues, contact the owner of the remote computer or your network administrator.

Also, you are limited in the number of users who can connect simultaneously to a Remote Desktop session or Remote Desktop Services session. A limited number of RDP connections can be caused by misconfigured Group Policy or RDP-TCP properties in Remote Desktop Services Configuration. By default, the connection is configured to allow an unlimited number of sessions to connect to the server.

Symptom 2: Port assignment conflict

You experience a port assignment conflict. This problem might indicate that another application on the Remote Desktop server is using the same TCP port as the Remote Desktop Protocol (RDP). The default port assigned to RDP is 3389.

Symptom 3: Incorrectly configured authentication and encryption settings

After a Remote Desktop server client loses the connection to a Remote Desktop server, you experience one of the following symptoms:

  • You cannot make a connection by using RDP.
  • The session on the Remote Desktop server does not transition to a disconnected state. Instead, it remains active even though the client is physically disconnected from the Remote Desktop server.

If the client logs back in to the same Remote Desktop server, a new session may be established, and the original session may remain active.

Also, you receive one of the following error messages:

  • Error message 1

    Because of a security error, the client could not connect to the Terminal server. After making sure that you are logged on to the network, try connecting to the server again.

  • Error message 2

    Remote desktop disconnected. Because of a security error, the client could not connect to the remote computer. Verify that you are logged onto the network and then try connecting again.

Symptom 4: License certificate corruption

Remote Desktop Services clients are repeatedly denied access to the Remote Desktop server. If you are using a Remote Desktop Services client to log on to the Remote Desktop server, you may receive one of the following error messages.

  • Error message 1

    Because of a security error, the client could not connect to the Terminal server. After making sure that you are logged on to the network, try connecting to the server again.

  • Error message 2

    Remote desktop disconnected. Because of a security error, the client could not connect to the remote computer. Verify that you are logged onto the network and then try connecting again.

    Vintage 1964 Mattel Smack A Roo Baseball, Bowling, Smack it Action Game in Box. $20.00 shipping. Mattel ABC Talking Monday Night Football NFL Sports Game. Mattel talking baseball game. Find many great new & used options and get the best deals for Vintage 1972 Mattel Talking Football Board Game 3981 at the best online prices at eBay! Free shipping for many products! Intellivision World Series Major League Talking Baseball Game 19821st.Ed.Sealed 5 out of 5 stars (1) 1 product ratings - Intellivision World Series Major League Talking Baseball Game 19821st.Ed.Sealed. Jun 12, 2006 See and discover other items: mattel games, classic game, classic games, baseball card game, baseball games for kids There's a problem loading this menu right now. Learn more about Amazon Prime.

  • Error message 3

    Because of a security error, the client could not connect to the Terminal server. After making sure that you are logged on to the network, try connecting to the server again.
    Remote desktop disconnected. Because of a security error, the client could not connect to the remote computer. Verify that you are logged onto the network and then try connecting again.

Additionally, the following event ID messages may be logged in Event Viewer on the Remote Desktop server.

  • Event message 1

    Event ID: 50
    Event Source: TermDD
    Event Description: The RDP protocol component X.224 detected an error in the protocol stream and has disconnected the client.

  • Event message 2

    Event ID: 1088Event Source: TermServiceEvent Description: The terminal services licensing grace period has expired and the service has not registered with a license server. A terminal services license server is required for continuous operation. A terminal server can operate without a license server for 90 days after initial start up.

  • Event message 3

    Event ID: 1004
    Event Source: TermService
    Event Description: The terminal server cannot issue a client license.

  • Event message 4

    Event ID: 1010
    Event Source: TermService
    Event Description: The terminal services could not locate a license server. Confirm that all license servers on the network are registered in WINS/DNS, accepting network requests, and the Terminal Services Licensing Service is running.

  • Event message 5

    Event ID: 28
    Event Source: TermServLicensing
    Event Description: Terminal Services Licensing can only be run on Domain Controllers or Server in a Workgroup. See Terminal Server Licensing help topic for more information.

Resolution for Symptom 1

Microsoft

To resolve this problem, use the following methods, as appropriate.

Verify Remote Desktop is enabled

  1. Open the System item in Control Panel. To start the System tool, click Start, click Control Panel, click System, and then click OK.

  2. Under Control Panel Home, click Remote settings.

  3. Click the Remote tab.

  4. Under Remote Desktop, select either of the available options, depending on your security requirements:

    • Allow connections from computers from computers running any version of Remote Desktop (less secure)

    • Allow connections from computers only from computers running Remote Desktop with Network Level Authentication (more secure)

If you select Don't allow connections to this computer on the Remote tab, no users will be able to connect remotely to this computer, even if they are members of the Remote Desktop Users group.

Verify Remote Desktop Services Limit number of connections policy

  1. Start the Group Policy snap-in, and then open the Local Security Policy or the appropriate Group Policy.

  2. Locate the following command:

    Local Computer Policy > Computer Configuration > Administrative Templates > Windows Components > Remote Desktop Services > Remote Desktop Session Host > Connections Limit number of connections

  3. Click Enabled.

  4. In the RD Maximum Connections allowed box, type the maximum number of connections that you want to allow, and then click OK.

Verify Remote Desktop Services RDP-TCP properties

Follow these steps, depending on your operating system version.

Setting via Remote Desktop Services Configuration

Configure the number of simultaneous remote connections allowed for a connection:

  1. On the RD Session Host server, open Remote Desktop Session Host Configuration. To open Remote Desktop Session Host Configuration, click Start, point to Administrative Tools, point to Remote Desktop Services.

  2. Under Connections, right-click the name of the connection, and then click Properties.

  3. On the Network Adapter tab, click Maximum connections, enter the number of simultaneous remote connections that you want to allow for the connection, and then click OK.

  4. If the Maximum connections option is selected and dimmed, the Limit number of connections Group Policy setting has been enabled and has been applied to the RD Session Host server.

Verify Remote Desktop Services Logon rights

Configure the Remote Desktop Users Group.

The Remote Desktop Users group on an RD Session Host server grants users and groups permission to remotely connect to an RD Session Host server. You can add users and groups to the Remote Desktop Users group by using the following tools:

  • Local Users and Groups snap-in
  • The Remote tab in the System Properties dialog box on an RD Session Host server
  • Active Directory Users and Computers snap-in, if the RD Session Host server is installed on a domain controller

You can use the following procedure to add users and groups to the Remote Desktop Users group by using the Remote tab in the System Properties dialog box on an RD Session Host server.

Membership in the local Administrators group, or equivalent, on the RD Session Host server that you plan to configure, is the minimum required to complete this procedure.

Add users and groups to the Remote Desktop Users group by using the Remote tab

  1. Start the System tool. To do this, click Start, click Control Panel, click the System icon, and then click OK.

  2. Under Control Panel Home, click Remote settings.

  3. On the Remote tab in the System Properties dialog box, click Select Users. Add the users or groups that have to connect to the RD Session Host server by using Remote Desktop.

Note

Microsoft Remote Desktop 10 For Mac License Issue Is Preventing Mac

If you select the Don't allow connections to this computer option on the Remote tab, no users will be able to connect remotely to this computer, even if they are members of the Remote Desktop Users group.

Add users and groups to the Remote Desktop Users group by using Local Users and Groups snap-in

  1. Click Start, click Administrative Tools, and then click Computer Management.
  2. In the console tree, click the Local Users and Groups node.
  3. In the details pane, double-click the Groups folder.
  4. Double-click Remote Desktop Users, and then click Add.
  5. In the Select Users dialog box, click Locations to specify the search location.
  6. Click Object Types to specify the types of objects that you want to search for.
  7. In the Enter the object names to select (examples) box, type the name you want to add.
  8. Click Check Names.
  9. When the name is located, click OK.

Note

  • You can't connect to a computer that's asleep or hibernating, so make sure the settings for sleep and hibernation on the remote computer are set to Never. (Hibernation isn't available on all computers.) For information about making those changes, see Change, create, or delete a power plan (scheme).
  • You can't use Remote Desktop Connection to connect to a computer using Windows 7 Starter, Windows 7 Home Basic, or Windows 7 Home Premium.
  • Members of the local Administrators group can connect even if they are not listed.

Resolution for Symptom 2

Important

This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, seeHow to back up and restore the registry in Windows.

To resolve this problem, determine which application is using the same port as RDP. If the port assignment for that application cannot be changed, change the port assigned to RDP by changing the registry. After you change the registry, you must restart the Remote Desktop Services service. After you restart the Remote Desktop Services service, you should verify that the RDP port has been changed correctly.

Remote Desktop server listener availability

The listener component runs on the Remote Desktop server and is responsible for listening for and accepting new Remote Desktop Protocol (RDP) client connections, thereby allowing users to establish new remote sessions on the Remote Desktop server. There is a listener for each Remote Desktop Services connection that exists on the Remote Desktop server. Connections can be created and configured by using the Remote Desktop Services Configuration tool.

To perform these tasks, refer to the following sections.

Determine which application is using the same port as RDP

You can run the netstat tool to determine whether port 3389 (or the assigned RDP port) is being used by another application on the Remote Desktop server:

Microsoft Remote Desktop 10 For Mac License Issue Is Preventing Windows 10

  1. On the Remote Desktop server, click Start, click Run, type cmd, and then click OK.
  2. At the command prompt, type netstat -a -o and then press Enter.
  3. Look for an entry for TCP port 3389 (or the assigned RDP port) with a status of Listening. This indicates another application is using this port. The PID (Process Identifier) of the process or service using that port appears under the PID column.

To determine which application is using port 3389 (or the assigned RDP port), use the tasklist command-line tool along with the PID information from the netstat tool:

  1. On the Remote Desktop server, click Start, click Run, type cmd, and then click OK.
  2. Type tasklist /svc and then press Enter.
  3. Look for an entry for the PID number that is associated with the port (from the netstat output). The services or processes that are associated with that PID appear on the right.

Change the port assigned to RDP

You should determine whether this application can use a different port. If you cannot change the application's port, you must change the port that is assigned to RDP.

Important

We recommend that you do not change the port that is assigned to RDP.

If you have to change the port assigned to RDP, you must change the registry. To do this, you must be a member of the local Administrators group, or you must have been granted the appropriate permissions.

To change the port that is assigned to RDP, follow these steps:

  1. On the Remote Desktop server, open Registry Editor. To open Registry Editor, click Start, click Run, type regedit, and then click OK.

  2. If the User Account Control dialog box appears, verify that the action it displays is what you want, and then click Continue.

  3. Locate and then click the following registry subkey:

    HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlRemote Desktop serverWinStations

RDP-TCP is the default connection name. To change the port for a specific connection on the Remote Desktop server, select the connection under the WinStations key:

  1. In the details pane, double-click the PortNumber registry entry.
  2. Type the port number that you want to assign to RDP.
  3. Click OK to save the change, and then close Registry Editor.

Restart the Remote Desktop Services service

For the RDP port assignment change to take effect, stop and start the Remote Desktop Services service. To do this, you must be a member of the local Administrators group, or you must have been granted the appropriate permissions.

To stop and start the Remote Desktop Services service, follow these steps:

  1. On the Remote Desktop server, open the Services snap-in. To do this, click Start, point to Administrative Tools, and then click Services.

  2. If the User Account Control dialog box appears, verify that the action it displays is what you want, and then click Continue.

  3. In the Services pane, right-click Remote Desktop Services, and then click Restart.

  4. If you are prompted to restart other services, click Yes.

  5. Verify that the Status column for the Remote Desktop Services service displays a Started status.

Verify that the RDP port has changed

To verify that the RDP port assignment has been changed, use the netstat tool:

  1. On the Remote Desktop server, click Start, click Run, type cmd, and then click OK.

  2. At the command prompt, type netstat -a then press Enter.

  3. Look for an entry for the port number that you assigned to RDP. The port should appear in the list and have a status of Listening.

Important

Remote Desktop Connection and the Terminal server Web Client use port 3389, by default, to connect to a Remote Desktop server. If you change the RDP port on the Remote Desktop server, you will have to modify the port used by Remote Desktop Connection and the Remote Desktop server Web Client. For more information, see Change the listening port for Remote Desktop on your computer.

Verify that the listener on the Remote Desktop server is working

Microsoft Remote Desktop 10 For Mac License Issue Is Preventing Covid 19

To verify that the listener on the Remote Desktop server is working correctly, use any of the following methods.

Note

RDP-TCP is the default connection name and 3389 is the default RDP port. Use the connection name and port number specific to your Remote Desktop server configuration.

Microsoft Remote Desktop 10 For Mac License Issue Is Preventing

  • Method 1

    Use an RDP client, such as Remote Desktop Connection, to establish a remote connection to the Remote Desktop server.

  • Method 2

    Use the qwinsta tool to view the listener status on the Remote Desktop server:

    1. On the Remote Desktop server, click Start, click Run, type cmd, and then click OK.
    2. At the command prompt, type qwinsta, and then press Enter.
    3. The RDP-TCP session state should be Listen.

  • Method 3

    Use the netstat tool to view the listener status on the Remote Desktop server:

    1. On the Remote Desktop server, click Start, click Run, type cmd, and then click OK.
    2. At the command prompt, type netstat -a then press Enter.
    3. The entry for TCP port 3389 should be Listening.

  • Method 4

    Use the telnet tool to connect to the RDP port on the Remote Desktop server:

    1. From another computer, click Start, click Run, type cmd, and then click OK.
    2. At the command prompt, type telnet <servername> 3389 , where <servername> is the name of the Remote Desktop server, and then press Enter.

    If telnet is successful, you receive the telnet screen and a cursor.

    If telnet is not successful, you receive the following error message:

    Connecting To servername.. Could not open connection to the host, on port 3389: Connect failed

    The qwinsta, netstat, and telnet tools are also included in Windows XP and Windows Server 2003. You can also download and use other troubleshooting tools, such as Portqry.

Resolution for Symptom 3

To resolve the issue, configure authentication and encryption.

To configure authentication and encryption for a connection, follow these steps:

  1. On the RD Session Host server, open Remote Desktop Session Host Configuration. To open Remote Desktop Session Host Configuration, click Start, point to Administrative Tools, point to Remote Desktop Services, and then click Remote Desktop Session Host Configuration.

  2. Under Connections, right-click the name of the connection, and then click Properties.

  3. In the Properties dialog box for the connection, on the General tab, in Security layer, select a security method.

  4. In Encryption level, click the level that you want. You can select Low, Client Compatible, High, or FIPS Compliant. See Step 4 above for Windows Server 2003 for Security layer and Encryption level options.

Note

  • To perform this procedure, you must be a member of the Administrators group on the local computer, or you must have been delegated the appropriate authority. If the computer is joined to a domain, members of the Domain Admins group might be able to perform this procedure. As a security best practice, consider using Run as to perform this procedure.
  • To open Remote Desktop Services Configuration, click Start, click Control Panel, double-click Administrative Tools, and then double-click Remote Desktop Services Configuration.
  • Any encryption level settings that you configure in Group Policy override the configuration that you set by using the Remote Desktop Services Configuration tool. Also, if you enable the System cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing Group Policy setting, this setting overrides the Set client connection encryption level Group Policy setting.
  • When you change the encryption level, the new encryption level takes effect the next time a user logs on. If you require multiple levels of encryption on one server, install multiple network adapters and configure each adapter separately.
  • To verify that certificate has a corresponding private key, in Remote Desktop Services Configuration, right-click the connection for which you want to view the certificate, click the General tab, click Edit, click the certificate that you want to view, and then click View Certificate. At the bottom of the General tab, the statement, You have a private key that corresponds to this certificate, should appear. You can also view this information by using the Certificates snap-in.
  • The FIPS compliant setting (the System cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing setting in Group Policy or the FIPS Compliant setting in Remote Desktop server Configuration) encrypts and decrypts data sent from the client to the server and from the server to the client, with the Federal Information Processing Standard (FIPS) 140-1 encryption algorithms, using Microsoft cryptographic modules. For more information, see Terminal Services in Windows Server 2003 Technical Reference.
  • The High setting encrypts data sent from the client to the server and from the server to the client by using strong 128-bit encryption.
  • The Client Compatible setting encrypts data sent between the client and the server at the maximum key strength supported by the client.
  • The Low setting encrypts data sent from the client to the server using 56-bit encryption.

Additional troubleshooting step: Enable CAPI2 event logs

To help troubleshoot this problem, enable CAPI2 event logs on both the client and server computers. This command is shown in the following screenshot.

Workaround for the issue (You cannot completely disconnect a Remote Desktop server connection) described in Symptom 3

To work around this problem, follow these steps:

  1. Click Start, click Run, type gpedit.msc, and then click OK.
  2. Expand Computer Configuration, expand Administrative Templates, expand Windows Components, expand Remote Desktop Services, expand Remote Desktop Session Host, and then click Connections.
  3. In the right pane, double-click Configure keep-alive connection interval.
  4. Click Enabled, and then click OK.
  5. Close Group Policy Object Editor, click OK, and then quit Active Directory Users and Computers.

Resolution for Symptom 4

Important

This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see 322756 How to back up and restore the registry in Windows.

To resolve this problem, back up and then remove the X509 Certificate registry keys, restart the computer, and then reactivate the Remote Desktop Services Licensing server. To do this, follow these steps.

Microsoft Remote Desktop 10 For Mac License Issue Is Preventing Coronavirus

Note

Perform the following procedure on each of the Remote Desktop servers.

  1. Make sure that the Remote Desktop server registry has been successfully backed up.

  2. Start Registry Editor.

  3. Locate and then click the following registry subkey:

    HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlTerminal ServerRCM

  4. On the Registry menu, click Export Registry File.

  5. Type exported- Certificate in the File name box, and then click *Save.

    Note

    If you have to restore this registry subkey in the future, double-click the Exported-parameters.reg file that you saved in this step.

  6. Right-click each of the following values, click Delete, and then click Yes to verify the deletion:

    • Certificate
    • X509 Certificate
    • X509 Certificate ID
    • X509 Certificate2

  7. Exit Registry Editor, and then restart the server.

References

For more information about Remote Desktop Gateway, see the following articles:

If this article does not help you resolve the problem, or if you experience symptoms that differ from those that are described in this article, visit the Microsoft Support for more information. To search your issue, in the Search support for help box, type the text of the error message that you received, or type a description of the problem.

Use Remote Desktop on your Windows, Android, or iOS device to connect to a Windows 10 PC from afar.

  1. Set up the PC you want to connect to so it allows remote connections:

    • Make sure you have Windows 10 Pro. To check, go to Start > Settings > System > About and look for Edition. For info on how to get it, go to Upgrade Windows 10 Home to Windows 10 Pro.

    • When you're ready, select Start > Settings > System > Remote Desktop, and turn on Enable Remote Desktop.

    • Make note of the name of this PC under How to connect to this PC. You'll need this later.

  2. Use Remote Desktop to connect to the PC you set up:

    • On your local Windows 10 PC: In the search box on the taskbar, type Remote Desktop Connection, and then select Remote Desktop Connection. In Remote Desktop Connection, type the name of the PC you want to connect to (from Step 1), and then select Connect.

    • On your Windows, Android, or iOS device: Open the Remote Desktop app (available for free from Microsoft Store, Google Play, and the Mac App Store), and add the name of the PC that you want to connect to (from Step 1). Select the remote PC name that you added, and then wait for the connection to complete.





Skyrim Special Edition No Npc Greetings
Sufjan Stevens Michigan Zip

Comments are closed.